Solar Cell
Solar Panel
PV Inverter
PV Inverter Accessories
 

 

 

 
Solar King
 
SLK-4000/6000 (VDE)
 
PV Inverter
 

SOLAR KING 4000 / 6000
 


Product View -SLK-4000

 
 
 
 
 
 
 
 
 
 
 
 
SLK-6000

 

The most advanced grid-tie PV inverter in the world. Converting sun light into electricity energy for home / industrial applications, and powering up our world with free solar energy is now no longer just a dream.

Features :

  1. Anti-Islanding detection methods: Frequency, voltage and utility impedance.
  2. Build-in MPPT (Maximum Power Point Tracking) function.
  3. High efficiency with wide range operation.
  4. Design to meet VDE0126-1-1 requirements.
  5. Easy assembly in production line.
  6. Easy replacement when servicing. The mean time of service is less than 20 minutes.
  7. Firmware flash capability: The firmware inside the micro-controllers can be updated by optional communication interface.
  8. GFCI: Ground Fault Current Interruption, which is also known as RCD (Residual Current Device). To prevent electrical hazard of user, a current transformer monitoring the difference between L and N current is applied. When the current difference is larger than specified value stated in section “General Data”, inverter will cut its output to grid.
  9. Bundled software for user buying optional communication card.
    Solar Control Monitoring Software V1.3:  DOWNLOAD
    Solar Control Monitoring Software User Manual: DOWNLOAD
  10. CE, VDE0126, DK5940, RD1663, AS3100 & AS4777, G83-1 & G59-2 certified.
    CERTIFICATE DOWNLOAD :CE /VDE0126 /DK5940 /RD1663 /AS4777/ G83-1 /G59-2

 

* PCM Solar King installation and user manual-English_20100121 --DOWNLOAD

* PCM Solar system calcuation software --DOWNLOAD
(Software requirement : Microsoft .Net framework 3.5 (install here))

Model

SLK-4000

SLK-6000

Input Data

Maximum Input Power

4700W

6500W

Nominal DC voltage

SLK-4000 360~400V;SLK-6000 450~500V

Max. input voltage
Maximum PV open voltage

500VDC

600VDC

MPPT voltage range

150V to 500V +/-5%

150V to 600V +/-5%

System start-up voltage

100 +/-5%

Working voltage range

100 +/-5%~500-5%+0%V

100 +/-5%~600-5%+0%V

Initial feeding voltage

150V +/-5%

Full rating working range

250V to 500V

250V to 600V

Max. input current

18.8ADC

25ADC

Shutdown voltage

80V typical

DC voltage ripple

< 10%

DC insulation resistance

> 8M ohm

DC Switch

On/Off 20A

On/Off 30A

DC Connector

Tyco-contact (3-pair)

Attached DC Connector

SLK-4000 Tyco-contact (1 pair)                               SLK-6000 Tycocontact (3 pair)

Output data

Nominal output power

4000W

6000W

Maximum output power

4400W

6000W

Operational Voltage range 1

184V, minimum
264V maximum

Operational Normal voltage

230 Vac

Operational frequency range

50/60Hz, auto selection
47.5<f50<50.2 for 50Hz  2
59.3<f60<60.5 for 60Hz  3

Nominal output current

17.4A

26.1A

O/P current distortion 4

THD<4%, each harmonics <3%

Power Factor

>0.99

DC current injection

<0.5% of rated inverter output current

General Data

Internal power consumption

< 7W

<10W

Standby power (at night)

< 0.1W

Minimum conversion efficiency (DC/AC)

>90%Under input voltage>210V, load >20%

Maximum Conversion Efficiency (DC/AC) 5

>96%

European Efficiency

>95%

GFCI threshold 6

See ground fault current detection

Ground current detection range

0~300mA

Ground current detection frequency

0~700Hz

DC input impedance requirement

>2M ohm

Protection degree

IP 65 or IP 43

Operation temperature

-20 to 55°C

Humidity

0 to 95%, non-condensing

Heat Dissipation

Convection

Acoustic noise level

<36dB, A-weighted, frequency up to 20kHz

Altitude

5°C derated for each additional 500m

* Load curve :  (only for SLK-4000)

 
The relation of input DC voltage and output power is shown in figure. Once input V is less than 250V, the relation of I/P V and load % is : Load% = 0.4 x Vi



 

Mechanical Requirements:

Model

SLK-4000

SLK-6000

Physical: W*D*H (mm)

550*300*133

550*420*143

Physical: Weight (kg)

21

27

Shipping: W*D*H (mm)

660*460*265

660*580*265

Shipping: Weight (kg)

23

31

 
** The dimension and weight here could be changed due to product modification
 
 
 
 

 


  

 
Taipei Headquarter: Powercom Co., Ltd Add. : 9F, No. 246, Lien Chen Road Chung Ho District, New Taipei City, Taiwan.
TEL: 886-2-2225-8552FAX: 886-2-2225-1776 , 886-2-2226-0537
  Copyright ©2013 All right Reserved. Specifications subject to change without prior notice.
DESIGN BY EZTRUST
網頁設計 藝誠網站設計